share to:
 woven fabri products cmaterial manufacturing process for suppliers
Non-woven fabric is a kind of non-woven fabric. It directly uses polymer chips, short fibers or filaments to wind the fibers through airflow or mechanical web, and then it is hydro-entangled, needle-punched, or hot-rolled, and finally finished. Non-woven cloth formed.
 woven fabri products cmaterial manufacturing process for suppliers
 Non-woven fabric (Non Woven Fabric or Nonwoven cloth), also known as non-woven fabric, consists of oriented or random fibers. It is a new generation of environmentally-friendly materials that are moisture-proof, breathable, flexible, lightweight, non-combustible, and easily decomposed. , non-toxic, non-irritating, colorful, low-cost, recyclable and so on. If more use of polypropylene (PP material) pellets as raw materials, the high-temperature melting, spinning, shop outline, hot-press coiling continuous one-step method of production. It is called cloth because of its cloth's appearance and certain properties.
 woven fabri products cmaterial manufacturing process for suppliers
Heat-bonded non-woven fabric process:
Thermally bonded non-woven fabric refers to a fibrous or powdery hot-melt adhesive reinforcing material added to the web, and the web is heated and melted to be cooled and consolidated into a cloth.
Wet non-woven process:
In the wet non-woven fabric, the fiber raw material placed in an aqueous medium is opened into single fibers, and the different fiber raw materials are mixed to form a fiber suspension slurry, and the suspension slurry is transported to a network forming mechanism, and the fibers are laid in a wet state. Reinforced into cloth.
Stitching non-woven process:
The stitch-bonded non-woven fabric is a type of dry-laid non-woven fabric. The stitch-bonding method uses a warp-knitted stitch structure to reinforce a web, a yarn layer, a non-textile material or a combination thereof to form a non-woven fabric.
Meltblown nonwoven fabric process:
The process of meltblown nonwoven fabrics: polymer feed - melt extrusion - fiber formation - fiber cooling - web formation - reinforcement into cloth.
Pulp air-laid nonwovens process:
Airlaid non-woven fabrics can also be referred to as dustless paper and dry papermaking non-woven fabrics. It uses the air-laid technology to open the wood pulp fiber board into a single fiber state, and then uses the air flow method to agglutinate the fiber on the reticular curtain, and the fiber network is then reinforced into a cloth.
Acupuncture non-woven process:
Acupuncture non-woven fabric is a kind of dry non-woven fabric. Acupuncture non-woven fabric uses the puncture effect of a needle to reinforce the fluffy web into cloth.
Spunlace non-woven process:
Spunlacing is the process of spraying high-pressure micro-fine water onto one or more layers of fiber webs to entangle the fibers with each other, so that the web can be reinforced and have a certain strength.
Spunbond nonwovens process:
Spun-bonded non-woven fabrics are laid after the polymer has been extruded and stretched to form continuous filaments, the filaments are laid into a web, and the webs are then subjected to self-adhesion, thermal bonding, chemical bonding or mechanical reinforcement methods. The web becomes a non-woven fabric.
 woven fabri products cmaterial manufacturing process for suppliers
New non-woven products recommended